kayo batery has lots of experience in medical battery which can be used for PDT and infusion pump. The cooperated customers of us including fresenius-kabi and Cardinal Health. The battery is 11.1V 2000mah .For more detail customers request please reference to our below details request
Name
11.1V 5500mAh Rechargeable Medical Battery Pack Battery Lipo Battery Polymer Lithium ion Battery Pack for Portable B-ultrasonic Battery Factory China Battery Factory Medical Battery Design Custom Medical Battery Packs
1.Product Configuration
No. |
Item |
Criteria |
Remark |
1 |
Li-ion Polymer Cell |
KPL 8553102 5500mAh 11.1V |
KAYO |
2 |
PCM |
S-8254AAV |
|
3 |
Wire & Connector |
UL1007- 22# 150±2mm |
|
4 |
PVC Film |
Blue |
2.Product Drawing
2.Product Configurations
No. | Item | Criteria | Remark | |||||
1 | Li-ion Polymer Cell |
KPL 8553102 5500mAh 11.1V |
KAYO | |||||
2 | PCM | S-8254AAV | ||||||
3 | Wire & Connector |
UL1007- 22# 150±2mm |
||||||
4 | PVC Film | Blue | ||||||
No. | Item | Rated Performance | Remark | |||||
1 | Rated Capacity | Typical | 5500mAh |
Discharge at 0.2C5A after standard charge fully. |
||||
Minimum | 5400mAh | |||||||
2 | Nominal Voltage | 11.1V |
Mean operation voltage during standard discharge. |
|||||
3 | Voltage at end of | 9.0V | Discharge cut-off voltage. | |||||
Discharge | ||||||||
4 | Charging Voltage | ≤12.6±0.06V | ||||||
5 |
AC (1KHz) Impedance New Cell Max.(mW) |
≤250mΩ | ||||||
6 | Standard Charge | Constant Current 0.5C5A | Charge time : Approx 4.0h. |
|||||
Constant Voltage 12.6V | ||||||||
0.01 C5A cut-off | ||||||||
7 | Standard Discharge | Constant current 0.2 C5A | ||||||
end voltage 6.0V | ||||||||
8 | Fast Charge | Constant Current 1C5A | Charge time : Approx 2.5h. | |||||
Constant Voltage 12.6V | ||||||||
0.01 C5A cut-off | ||||||||
9 | Fast Discharge | Constant current 1 C5A | ||||||
end voltage 9.0V | ||||||||
12 | Operation Temperature Range | Charge: 0~45℃ | 60±25%RH. | |||||
Discharge: -20~60℃ | Bare Cell. | |||||||
13 | Storage Temperature | Less than 1 year: -20~25℃ | ||||||
Range | Less than 3 months: -20~40℃ | |||||||
14 | Storage Humidity Range | 60±25%RH. | ||||||
15 | Weight | Approx:250g | Whole product | |||||
16 | Product Dimension | Length:Max.162.0mm | Initial dimension | |||||
Width: Max.105.0mm | ||||||||
Thickness:Max.10.0mm |
3.Cycle Life and Leakage-Proof
Table 4
No. | Item |
Criteria |
Test Conditions |
1 |
Cycle Life(0.5 C5A) |
Higher than 70% of the Initial Capacities of the Cells |
Carry out 500 cycle charging/ |
2 |
Leakage-Proof |
No leakage(visual inspection) |
After full charge, store at 60±3℃ |
4.PCM Specification
4.1 Using scope: The document applies to Li-ion Battery protection module for KAYO industrials.
4.2 Battery capacity:5500mAh
4.3 Environment request: RoHS.
4.4 Function description: Over charge protection, Over discharge protection, Over current protection
Short circuit protection
5.Certificate
6.Warranty
12 months limited warranty against workmanship and material defect.
7.Safety issues:
We have insurance guarantee. China CPIC if the products is produced by KAYO,and it brings any problem when your used such as property damage and people injured.
if the third parts give the report, the PICC will give your compensation each can as high as USD500,000.
Products application
Infusion pump
Trade Term:
1. Price term: FOB (Shenzhen/Guangzhou/HongKong/Shanghai),Ex-works.CIF,C&F.
2. Payment term:30%TT in advance and the balance 70% against copy of B/L,or 30%TT in advance and the balance before shipment,or 30%TT and 70% LC at sight.
3. Delivery time: If kayo ogo,3-15 days after getting deposite.If OEM,about 20-25 working days after receiving deposite and all the design.
4.Brand: kayo or OEM
5. The payment terms will be subject to actual transaction amount.
After-sales Service
Refund request
If spare parts are not complete, please call us and feedback details within 7 days,
we will send replacement immediately.
KAYO batteryAdvantages
Lithium battery has high working voltage , energy density , low self discharge rate and memoryless effect etc. Lithium battery can be made thinner and smaller . The minimum thickness of polymer li-ion battery is 0.5mm , and can be made into different size and shape , which greatly improves the flexibility of battery design , so as to make battery with different shapes and capacity on the products need.
http://www.kayo-battery.com/